| { "2012 Compact Cardiod" : { "Directional pattern": "Cardioid", "Principle of operation": "Pressure gradient", "Cartridge type": "Pre-polarized condenser", "Frequency response": "20 Hz - 20 kHz", "Effective frequency range, ±2 dB, at 30 cm (11.8 in)": "40 Hz to 20 kHz", "Sensitivity, nominal, ±2 dB at 1 kHz": "8 mV/Pa; -42 dB re. 1 V/Pa", "Equivalent noise level, A-weighted": "Typ. 20 dB(A) re 20 µPa (max. 22 dB(A))", "Distortion, THD < 1%": "148 dB SPL (151 dB SPL peak)", "Dynamic range": "Typ. 131 dB", "Max. SPL, THD 10%": "153 dB SPL (156 dB SPL peak)", "Switchable attenuator, filters etc.": "-", "Rated output impedance": "60 Ω", "Minimum load impedance": "2 kΩ", "Cable drive capability": "100 m (328 ft)", "Output balance principle": "Impedance balancing with Active Drive", "Common mode rejection ratio (CMRR)": "> 60 dB", "Power supply (for full performance)": "P48 (Phantom Power)", "Current consumption": "0.7 mA", "Connector": "XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase", "Color": "Matte black", "Weight": "83 g (2.9 oz)", "Microphone diameter": "19 mm (0.75 in)", "Capsule diameter": "17 mm (0.67 in)", "Microphone length": "94 mm (3.7 in)", "Maximum output voltage, RMS": "8.7 V (21 dBu)", "Polarity": "+V at pin 2 for positive sound pressure", "Temperature range": "-40°C to 45°C (-40°F to 113°F)", "Relative humidity (RH)": "Up to 90%", "Sensitivity selection tolerance (at 1 kHz)": "±1.5 dB" }, "2015 Wide Cardiod" : { "Directional pattern": "Wide cardioid", "Principle of operation": "Pressure gradient", "Cartridge type": "Pre-polarized condenser", "Frequency response": "20 Hz - 20 kHz", "Effective frequency range, ±2 dB, at 30 cm (11.8 in)": "40 Hz to 18 kHz", "Sensitivity, nominal, ±2 dB at 1 kHz": "12 mV/Pa; -37.7 dB re. 1 V/Pa", "Equivalent noise level, A-weighted": "Typ. 18 dB(A) re 20 µPa (max. 20 dB(A))", "Distortion, THD < 1%": "147 dB SPL (150 dB SPL peak)", "Dynamic range": "Typ. 132 dB", "Max. SPL, THD 10%": "150 dB SPL (153 dB SPL peak)", "Switchable attenuator, filters etc.": "-", "Rated output impedance": "60 Ω", "Minimum load impedance": "2 kΩ", "Cable drive capability": "100 m (328 ft)", "Output balance principle": "Impedance balancing with Active Drive", "Common mode rejection ratio (CMRR)": "> 60 dB", "Power supply (for full performance)": "P48 (Phantom Power)", "Current consumption": "0.7 mA", "Connector": "XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase", "Color": "Matte black", "Weight": "83 g (2.9 oz)", "Microphone diameter": "19 mm (0.75 in)", "Capsule diameter": "17 mm (0.67 in)", "Microphone length": "94 mm (3.7 in)", "Maximum output voltage, RMS": "8.7 V (21 dBu)", "Polarity": "+V at pin 2 for positive sound pressure", "Temperature range": "-40°C to 45°C (-40°F to 113°F)", "Relative humidity (RH)": "Up to 90%", "Sensitivity selection tolerance (at 1 kHz)": "±1.5 dB" }, "4055 Kick": { "Directional pattern": "Open Cardioid", "Principle of operation": "Pressure gradient", "Cartridge type": "Pre-polarized condenser", "Frequency response": "20 Hz - 20 kHz", "Effective frequency range ±2 dB, at 20 cm (7.9 in)": "40 Hz - 18 kHz with a 6 dB soft boost at 10 kHz", "Sensitivity, nominal, ±2 dB at 1 kHz": "2 mV/Pa; -54 dB re. 1 V/Pa", "Equivalent noise level, A-weighted": "Typ. 27 dB(A) re. 20 µPa (max. 29 dB(A))", "Equivalent noise level, ITU-R BS.468-4": "Typ. 39 dB (max. 41 dB)", "Distortion, THD < 1%": "156dB SPL RMS, 159 dB SPL peak", "Dynamic range": "Typ. 132 dB", "Max. SPL, THD 10%": "164 dB SPL peak", "Rated output impedance": "380 Ω", "Minimum load impedance": "2 kΩ", "Cable drive capability": "100 m (328 ft)", "Output balance principle": "Impedance balancing with Active Drive", "Common mode rejection ratio (CMRR)": "> 55 dB", "Power supply (for full performance)": "P48 (Phantom Power)", "Current consumption": "2.0 mA", "Connector": "XLR-3M. Pin 1: shield, Pin 2: signal + phase, Pin 3: - phase", "Color": "Matte black", "Weight": "241 g (8.5 oz)", "Microphone diameter": "57 mm (2.24 in)", "Capsule diameter": "17 mm (0.67 in)", "Microphone length": "132 mm (5.19 in)", "Maximum output voltage, RMS": "9.75 V", "Polarity": "+V at pin 2 for positive sound pressure", "Temperature range": "-40°C to 45°C (-40°F to 113°F)", "Relative humidity (RH)": "Up to 90%" }, "4099 Instrument Mic": { "Directional pattern" : "Supercardioid", "Principle of operation" : "Pressure gradient", "Cartridge type" : "Pre-polarized condenser", "Frequency range" : "20 Hz - 20 kHz", "Frequency range, ± 2 dB, at 20 cm (7.9 in)" : "80 Hz - 15 kHz with 2 dB soft boost at 10-12 kHz", "Sensitivity, nominal, ±3 dB at 1 kHz" : "6 mV/Pa; -44 dB re. 1 V/Pa", "Equivalent noise level, A-weighted" : "Typ. 23 dB(A) re. 20 μPa (max. 26 dB(A))", "S/N ratio (A-weighted), re. 1 kHz at 1 Pa (94 dB SPL)" : "Typ. 71 dB(A)", "Total harmonic distortion (THD)" : "< 1% up to 131 dB SPL peak", "Dynamic range" : "Typ. 108 dB", "Max. SPL, peak before clipping" : "142 dB", "Output impedance" : "From MicroDot: 30 - 40 Ω. From DAD4099/DAD6001-BC: 100 Ω", "Cable drive capability" : "Up to 300 m (984 ft) with DAD4099 or DAD6001-BC XLR Adapter", "Output balance principle" : "Signal balanced with DAD4099 or DAD6001-BC XLR Adapter", "Common mode rejection ratio (CMRR)" : "> 60 dB from 50 Hz to 15 kHz with DAD4099 or DAD6001-BC XLR Adapter", "Power supply (for full performance)" : "Min. 5 V to max. 50 V through DPA adapter for wireless systems", "Current consumption" : "Typ. 1.5 mA (microphone). 3.5 mA with DAD4099 or DAD6001-BC XLR Adapter", "Connector" : "MicroDot", "Color" : "Black", "Weight" : "27 g (0.95 oz)", "Microphone diameter" : "5.4 mm (0.21 in)", "Microphone length" : "45 mm (1.8 in)", "Cable length" : "1.8 m (5.9 ft)", "Cable diameter" : "1.6 mm (0.06 in) / 2.2 mm (0.09 in)", "Polarity" : "+V at MicroDot pin for positive sound pressure (and pin 2 on DAD4099 or DAD6001-BC XLR adapter)", "Temperature range" : "-40°C to 45°C (-40°F to 113°F)", "Relative humidity (RH)" : "Up to 90%", "Gooseneck length" : "140 mm (5.5 in)" } } |