{ "Fader Configuration" : "17 total, 16 assignable, 1 master", "Mixing Capacity" : "Input Channels: 40 total, 32 mono, 2 stereo, 2 return
Aux Buses: 20 total, 8 mono, 6 stereo
Stereo Buses: 1
Sub buses: 1", "Input Channel Functions" : "8 DCA Groups", "I\/O" : "Inputs: 16 XLR\/TRS Combo, 2 Stereo RCA
Outputs: 16 XLR
Expansion Slots: 1", "Onboard Processors" : "DSP: 8 effects, 10 GEQ", "Sampling Frequency Rate" : "Internal 48kHz", "Signal Delay" : "Less than 2.6 ms INPUT to OMNI OUT, Fs = 48 kHz", "Fader" : "100mm motorized, 10-bit resolution, +10 dB to -138 dB range", "Total Harmonic Distortion" : "Less than 0.05% 20 Hz - 20 kHz @ +4 dBu into 600, INPUT to OMNI OUT, Input gain = min. (measured with a -18 dB\/octave filter @ 80 kHz)", "Frequency Response" : "+0.5, -1.5 dB 20 Hz - 20 kHz, refer to +4 dBu output @ 1 kHz, INPUT to OMNI OUT", "Dynamic Range" : "110 dB typ., DA Converter, 107 dB typ., INPUT to OMNI OUT, Input Gain = Min.", "Hum & Noise Level" : "N\/A", "Equivalent Input Noise" : "-128 dBu typ., Input Gain = Max. (Measured with an A-weight filter)", "Residual Output Noise" : "-85 dBu, ST master off (Measured with an A-weight filter)", "Crosstalk" : "-100 dB (measured with a -30 dB\/octave filter @ 22 kHz), adjacent INPUT\/OMNI OUT channels, Input gain = min.", "Power Requirements" : "100 - 240 V 50\/60 Hz", "Power Consumption" : "100 Watts", "Dimensions" : "20.1\"w x 8.0\"h x 23.6\"d", "Weight" : "29.8 lbs", "Accessories" : "Quick Guide, Power Cord, Nuendo Live", "Options" : "Rackmount kit RK5014, Expansion Card, Foot Switch (FC5)", "Operating Temperature" : "0° - 40° C", "Storage Temperature" : "-20° - 60° C", "Recording\/Playback" : "Mac\/PC via USB 2.0, record/playback 34 tracks
USB Storage Device, record/playback 2 tracks", "Analog Input Characteristics" : "Mono: Combo Jack (XLR-3-31 type 2 or TRS phone), +66dB -6dB gain, 7.5 kΩ load impedance, For Use with Nominal 50 - 600 Ω Mics or 600 Ω Lines, Input Level Sensitivity -82 dBu (61.6 V), -10 dBu (245 mV), Nominal -62 dBu (0.616 mV), +10 dBu (2.45 V), Max Before Clip: -42 dBu (6.16 mV), +30 dBu (24.5 V), balanced
Stereo: RCA pin jack, 10 kΩ load impedance, for use with Nominal 600 Ω lines, input level sensitivity -30 dBV (31.6 V), nominal -10 dBV (316 mV), max before clip +10 dBV (3.16 V), unbalanced", "Analog Output Characteristics" : "OMNI: Stereo Phone Jack (TRS), 75 ω source impedance, for use with nominal 600 ω lines, GAIN SW +24 dBu position (default), Output level: nominal +4 dBu (1.23 V), +24 dBu (12.3 V), balanced XLR-3-32 type connector
PHONES: 100 ω source impedance, for use with nominal 40 ω phones, Output level: nominal 3 mW, max before clip 75mW, unbalanced", "Digital Input\/Output Specifications" : "USB (TO HOST): USB 2.0 (B type), 24-bit data length, 34-channel input \/ 34-channel output, PCM
iPad : USB 2.0 (A type) Playback MP3 or WAV file data \/ Record WAV file data", "Control I\/O Specifications" : "NETWORK Terminal: IEEE802.3 format, Level 10BASE-T\/100Base-TX, RJ-45 connector
Foot Switch: Ts phone connector" } |