| { "Sampling frequency rate" : { "External" : "44.1 kHz, 48 kHz, 88.2 kHz, 96 kHz, +4.1667%, +0.1%, –0.1%, –4.0% (±200 ppm)" }, "Signal delay" : "Less than 1.7 ms, Rio INPUT to Rio OUTPUT connect with PM10 using Dante, Fs= 96 kHz, Dante Receive Latency set to 0.25 msec", "Total harmonic distortion" : "Less than 0.05% 20 Hz-20 kHz@+4 dBu into 600Ω, Fs= 48 kHz, Less than 0.05% 20 Hz-40 kHz@+4 dBu into 600Ω, Fs= 96 kHz, INPUT to OUTPUT, Input Gain= Min.", "Frequency response" : "+0.5, –1.5 dB 20 Hz-20 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 48 kHz / +0.5, –1.5 dB 20 Hz-40 kHz, refer to +4 dBu output @1 kHz, INPUT to OUTPUT, Fs= 96 kHz", "Dynamic range" : "112 dB typ., DA Converter, 108 dB typ., INPUT to OUTPUT, Input Gain= Min.", "Hum & noise level" : { "Equivalent input noise" : "–128 dBu typ., Input Gain= Max.", "Residual output noise" : "–88 dBu, ST master off" }, "Crosstalk" : "-100dB, adjacent INPUT/OUTPUT channels, Input Gain = -6dB, @1 kHz *Measured with a 30dB/octave filter @22kHz", "Power requirements" : "100-240V, 50/60Hz", "Power consumption" : "120W", "Dimensions" : { "W" : "480 mm (18.9")", "H" : "220 mm (8.7")", "D" : "368 mm (14.5")" }, "Net weight" : "13.5 kg (29.8 lbs)", "Accessories" : "Owner’s Manual, AC power cord (250cm), Dante Virtual Soundcard Token leaflet", "Others" : { "NC Value" : { "FAN MODE LOW" : "NC=20", "HIGH" : "NC=30 (Measurement position: 1 m from the front of the unit)", "Operating temperature range" : "0 - 40°C", "Storage temperature range" : "–20 - 60°C" } } } |