| { "Acoustics" : { "Type" : "High-output, Coaxial Differential Dispersion powered two-way system", "Frequency Response" : "55 Hz - 20 kHz ±3 dB, -10 dB @ 45 Hz", "Driver" : { "LF" : "15" (380 mm)/3" (75 mm) voice coil, long excursion, shared ferrite motor system with HF", "HF" : "1.4" (36 mm) exit/3" (75 mm) voice coil, titanium dome compression driver" }, "Input Sensitivity" : "-30 dBu for 100 dB SPL", "Maximum SPL" : "126 dB continuous, 132 dB peak", "Dispersion" : "110° - 60° horizontal, 60° vertical (user-rotatable)", "Crossover" : "1.5 kHz active LR8 with low latency HF FIR equalization, balance presets for pole mount/pole mount with sub/stage monitor" }, "Module Audio Input" : { "Connectors" : " Female XLR input, male XLR link output, Dante Audio Neutrik EtherCON", "Analog Input Impedance" : "20 kOhms balanced to ground", "Maximum Analog Input Level" : "24.6 Vpp (+21 dBu), over voltage protected", "Internal Processing" : [ "Multi-channel DSP, programmable via TCP/IP using VU-Net software", "PEQ/shelving filters", "Up to 48 dB/oct HPF", "Low latency HF FIR filters", "Up to 200 ms input delay", "Pre-set selection via rear panel switch" ] }, "Network" : { "Connectors" : "2 x Neutrik EtherCON RJ45", "Protocol" : "TCP/IP and UDP/IP" }, "Amplifier" : { "Type" : "2-channel switch-mode, Class D, bridged tied load + 1 channel switch-mode, Class D", "Peak Output Power" : "2500 W total (2000 W LF, 500 W HF)", "Average Efficiency" : "89%", "Cooling" : "External convection cooled, with internal fan", "Maximum Ambient Temperature" : "104° F (40° C) for full output" }, "Power Supply" : { "Type" : "Switch mode, fixed frequency with PFC", "AC Input Operating Range" : "85 - 265 VAC, 50/60 Hz", "Power Factor" : ">0.98", "Nominal Power Consumption" : "160 W", "Mains Connector" : "Neutrik PowerCON True1" }, "Mechanical" : { "Enclosure" : "Extensively braced multi-laminate plywood", "Finish" : "Textured black PU coating", "Protective Grille" : "HEX perforated mild steel with protective zinc plating and black powder coat finish. Back with black grille cloth", "Fittings" : [ "Top hat for pole mounting", "15 x M8 mounting points", "Two side pocket handles" ], "Dimensions" : "16.81" W x 27.42" H x 16.61" D (427 x 696 x 422 mm)", "Weight" : "81.4 lbs (37 kg) excluding transit cover" } } |