| { "Source ": { "LED details ": "S4WRD II LED", "Max lumens (3200K / 3200K Gallery / Daylight Gallery) ": "11,430 / 9,716 / 10,333", "Lumens per watt (3200K / 3200K Gallery / Daylight Gallery)": { "120 V": "76.2 / 64.8 / 68.9", "230 V": "65.3 / 55.5 / 59.0" }, "L70 rating (hours to 70% output) ": ">45,000 hours" }, "Color ": { "Colors used ": "Warm or Cool White", "Color temperature range ": "3200K 80 or 90+ CRI, 5900K 90+ CRI", "Calibrated array ": "N/A", "Red shift ": "No" }, "Optical ": { "Field angle range ": "Swappable lens tubes between 5–90 degrees", "Gate size ": "79㎜", "Aperture size ": "Lens dependent", "Pattern projection ": "Yes", "Pattern size ": "A or B (see manual)", "Camera flicker control/ ㎐ range ": "No, not PWM dimmed" }, "Control ": { "Input method ": "DMX Control or Line Dimmed", "Protocols ": "DMX / RDM via RJ45", "Modes (Footprint) ": "1 Channel (Intensity) for DMX", "RDM configuration ": "Yes", "UI type ": "7-segment address display, local level control via UI", "Local control ": "Yes", "Onboard presets ": "No", "Onboard sequences ": "No", "Onboard effects ": "No", "Fixture to fixture control ": "No" }, "Electrical": { "Voltage range": [ "114–125 V, 60 ㎐ (120 V)", "209–252 V, 50 ㎐ (230 V)" ], "Input method": [ "Hard-wired, 1 m cord, Edison plug (120 V)", "Hard-wired, 1 m cord, bare end (230 V)" ], "Inrush": [ "30 A (first half-cycle) at 120 V", "12 A (first half-cycle) at 230 V" ], "Fixtures per circuit": { "120 V" : "14 (20 A switched circuit, R20 module or similar)", "230 V" : "6 fixtures per non-dimmed circuit (ER15AFR module)" }, "Wattage (Typical/Standby)": [ "150 W / 1.2 W (120 V)", "175 W / 3.7 W (230 V)" ], "Current draw": [ "1.26 A at 120 V", "0.75 A at 230 V" ], "Notes": [ "- When using line dimming, see the S4WRD manual for dimmer setup.", "- When using line dimming, standby power is 0 W." ] }, "Thermal": { "Ambient operating temp": "5°–50° C (41°–122° F)", "Fan (controllable)": "Yes (no)", "Droop compensation": "No", "dB range": "28㏈a (average at 1 m)", "BTUs/hour": [ "529 (120 V)", "597 (230 V)" ] }, "Physical": { "Materials": "Die-cast aluminum", "Color options": "Black, white, or custom color", "Mounting options": "Yoke", "IP rating": "IP-20, indoor only", "Weight": "3.73 lb (1.69㎏) (Retrofit only)", "Included accessories": "Source 4WRD mounting post" }, "Warranty": { "Retrofit kit": "Three years" }, "Regulatory and Compliance": { "Approved regulatory": [ "UL 1573 (complete luminaire)", "UL 1598C (retrofit kit)", "CSA C22.2 No. 166 (complete luminaire)", "CSA TIL B79-A (retrofit kit)", "CE Compliant" ] } } |