| { "FUNCTIONAL" : { "Supports 40 control zones" : "The first 16 can be used to control EchoConnect devices", "Supports playback of 64 Presets and 4 internal Sequences with one active at any time" : "", "User customized touchscreen interface with support for layout and naming of" : [ "Seven User pages", "Zone faders (up to 11 per page)", "Preset, Sequence and Off buttons (up to 30 per page)", "Six user definable utility buttons" ], "Color and White Pickers with programmable color chips" : "", "Innovative touch-based parameter controls" : "", "On-board help system" : "", "Extensive, searchable fixture library with support for RDM fixture discovery" : "", "Two configurable security levels for user access and setup" : "", "Adjustable time out options including" : "dim, off, or user selectable inactivity image" }, "PROTOCOLS" : [ "Support for DMX (ANSI E1.11), RDM (ANSI E1.20), sACN (ANSI E1.31), ArtNet, and EchoConnect protocols", "Support for up to 512 simultaneous addresses using any combination of output protocols", "EchoConnect output of up to 16 zones", "Connects to EchoConnect station bus for use with all Echo control and output products" ], "MECHANICAL" : { "7” color multi-touch touchscreen with adjustable backlight" : "", "800 x 480 screen resolution" : "", "Cast zinc bexel finished in fine textured powder coat paint available in four standard colors" : "Cream (RAL 9001), Gray (RAL 7001), Black (RAL 9004), and White (RAL 9003)", "No visible means of attachment" : "", "Flush-mount to industry standard 3-gang back box (RACO 697 or equivalent)" : "", "Back box for surface mount applications available from ETC" : "" }, "ELECTRICAL" : [ "RJ45 connector compliant with IEEE 802.3i for 10BASE-T, and 802.3u for 100BASE-TX", "Powered using 802.3af for Power over Ethernet", "Optional 24VDC power input for use with non-PoE systems", "Pluggable rising clamp screw terminal connector for Auxiliary Power and EchoConnect wiring", "Pluggable rising clamp screw terminal or IDC connector for DMX wiring", "USB port for firmware maintenance, file transfer, and show file storage" ], "ECHOCONNECT" : [ "Connects via two-wire EchoConnect control network using low-voltage Class 2 wiring", "Topology-free wiring over Belden 8471 or equivalent and one #14 ESD drain wire", "Supports use of Belden 1583A or equivalent Ethernet control wire when used with IDC termination kit", "Wiring may be bus, loop, homerun, or any combination of these", "Supports up to 500 meters (1,640 feet) of control wiring", "Up to 1,000 feet using Cat5" ], "DMX" : [ "Connector designed for use with Belden 9729 (or equivalent)", "Optional header included for use with Belden 1583A (or equivalent)", "Fully optically isolated from controller electronics", "Withstands fault voltages up to 250VAC" ], "REGULATORY AND COMPLIANCE" : [ "UL and cUL Listed", "CE Marked", "RoHS compliance", "WEEE" ], "THERMAL" : [ "Ambient temperature: 0-40°C / 32-104°F", "Ambient humidity: 5-95% non-condensing" ] } |