| { "Input Connectors" : "1/4" TRS, female XLR (pin 2 hot), and barrier terminal strip", "Input Type" : "Electronically balanced/unbalanced, RF filtered ", "Input Impedance" : "Balanced 40 kOhm, unbalanced 20 kOhm ", "Max Input" : ">+21dBu balanced or unbalanced", "CMRR" : ">40dB, typically >55dB at 1kHz ", "Output Connectors" : "1/4" TRS, male XLR (pin 2 hot), and barrier terminal strip ", "Output Type" : "Impedance-balanced/unbalanced, RF filtered", "Output Impedance" : "Balanced 200 ohm, unbalanced 100 ohm", "Max Output" : ">+21dBu balanced/unbalanced into 2 kOhm or greater; >+18dBm balanced/unbalanced (into 600 ohm) ", "Bandwidth" : "20Hz to 20kHz, +0.5/-1dB", "Frequency Response" : "<10Hz to >50kHz, +0.5/-3dB; +/-15dB range; +/-6dB range", "Dynamic Range" : "109dB; 115dB", "Signal to Noise Ratio" : "90dB, 97dB", "THD+Noise" : "<0.005%", "Interchannel Crosstalk" : "<-80db, 20Hz to 20kHz", "Bypass Switch" : "Bypasses the graphic equalizer section in the signal path ", "Low cut Switch" : "(recessed) Activates the 40Hz 18dB/octave Bessel high-pass filter", "Range Switch" : "(recessed) Selects either +/- 6dB or +/- 15dB slider boost/cut range", "I/O Meter" : "4-LED bar graph (Green, Green, Yellow, Red) at -10, 0, +10, and +18dBu", "Indicators" : "EQ Bypass (Red); Clip (Red); Low Cut (Red); +/-6dB (Yellow); +/-15dB (Red)", "Operating Voltage" : "100VAC 50/60Hz; 120VAC 60Hz; 230VAC 50/60Hz", "Power Consumption" : "24W", "Power Connector" : "IEC receptacle", "Dimensions" : "5.25" H X 19" W X 7.9" D (13.4cm x 48.3cm x 20.1cm)", "Equipment Weight" : "10.6 lbs.", "Shipping Weight" : "11.6 lbs." } |