{ "Audio Inputs" : "16, balanced line-level, 1/4-inch TRS connector", "Inputs" : "Tip: Audio +; Ring: Audio -; Sleeve: Ground", "TRS Thru" : "Impedance matched output", "Analog to Digital Conversion" : "48kHz sample rate, 24 bit", "Frequency Response" : "4Hz-22kHz", "A-Net In" : [ "One Category 5 (RJ45 connector) ", "Four-position slot range selector switch for use with Pro16e A-Net" ], "A-Net Out" : "One Category 5 (RJ45 connector)", "Gain Settings" : "Four-position switch, -10dBv, 0dBu, +4dBu, and +22dBu", "Channel LED Indicators" : "Signal Present and Clip, per channel", "Line Inputs" : "Impedance: 48k ohms", "Metering" : "LEDs; green: Signal Present, red: Clip; per channel", "Stereo Operation" : "Two-position switch (Normal, Link)", "Maximum Input Level" : "+22dBu", "Input Impedance" : "17.8k ohm", "Freq. Response" : "4Hz-22kHz +0.2dB/-3dB", "THD +N" : "< 0.003%", "Crosstalk" : "-90dB", "Bit Error Rate (BER)" : "10(-12)", "Signal to Noise (unweighted)" : [ "90dB typical, A/D to D/A", "Measured from AN-16/i to AN-16/o Output Module" ], "Digital Outputs" : { "A-Net" : "1", "RJ45 connector" : "" }, "Pro16e A-Net" : "Use unshielded Cat-5e UTP (or better) cable", "Latency" : "<0.880 msec (measured from analog input to analog output)", "Power Supply" : { "External, DC, universal switching type" : "", "Input Voltage" : "100-240 volts, 50/60Hz, 30VA", "Output Voltage" : "18-24 VDC, 0.5 amp", "Plug Size" : "2 mm" }, "Power" : "18-24 VDC, 500mA", "Dimensions" : [ "19" (482.6 mm) wide x 5.75" (146 mm) deep;", "1U high" ], "Weight" : "6.8 lb (3.08 kg)" } |