| { "Sampling frequency rate":"External 44.1kHz, 48kHz, 88.2kHz, 96kHz", "Signal delay":"Less than 1.3ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=96kHz; Less than 2.6ms INPUT to OUTPUT, connect with DM3, Dante Receive Latency set to 0.25ms (one way), Fs=48kHz", "Total harmonic distortion":"Less than 0.2% +4 dBu@20Hz-20kHz into 600O, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600O, Gain=-6 dB, INPUT to OUTPUT, Fs=88.2kHz, 96kHz; Less than 0.1% +4 dBu@20Hz-20kHz into 600O, Gain=+66 dB / Less than 0.05% +4 dBU@20Hz-20kHz into 600O, Gain=-6 dB, INPUT to OUTPUT, Fs=44.1kHz, 48kHz *Measured with a -18 dB/octave filter @80kHz", "Frequency response":"+0.5, -1.5 dB 20Hz-20kHz, refer to the nominal output level @1kHz, INPUT to OUTPUT", "Dynamic range":"108 dB, INPUT to OUTPUT, Gain=-6 dB / 110 dB, DA Converter, Fs 96kHz; 108 dB, INPUT to OUTPUT, Gain=-6 dB / 112 dB, DA Converter, Fs 48kHz", "Hum & noise level":{ "Equivalent input noise":"-128 dBu, Gain=+66 dB, Fs 96kHz, 48kHz *Measured with A-weighting filter", "Residual output noise":"-86 dBu, Fs 96kHz / -88 dBu, Fs 48kHz, ST main off *Measured with A-weighting filter" }, "Crosstalk":"-100 dB, adjacent INPUT/OUTPUT channels, Input Gain = -6 dB *Measured with a -30 dB/octave filter @22kHz", "Heat dissipation":"100-240V, 50/60Hz, 43.5kcal/h", "Power requirements":"100-240V, 50/60Hz", "Power consumption":"50W", "Dimensions":"W 480mm (18.9); H88mm (3.5); D364mm (14.4)", "Net weight":"5.7kg (12.6lbs)", "Accessories":"Owners Manual, Power Cord (2.5m), Rubber stoppers (4)", "Others":"Temperature Range: Operating temperature range: 0 - 40?, Storage temperature range: -20 - 60?" } |