800-562-6006

Radial (R800 8030) Audio Switcher - Balanced

Balanced remote AB switcher

Radial (R800 8030) Audio Switcher

No reviews yet. Leave a review

What's in the box:

  • Radial Engineering Relay Xo Balanced Remote AB switcher
  • Limited 3-Year Warranty

Get More Value with CCI Solutions

UPS logo   Free UPS Shipping
Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price
Retail Price
$360.00
Save 17%
−$60.01
CCI Price
$299.99
Call 800-562-6006 for Availability
Item Number 
RAD-RELAYXO
Vendor Part
R800 8030

The Radial Relay Xo is a 1-in, 2-out balanced audio switcher designed to route the output of a microphone to two different audio inputs. You can use the Relay Xo to send the output of a microphone to two channels on the PA. The Relay Xo features a balanced XLR input and two balanced XLR outputs. There are no transformers or electronic buffers inside that could introduce distortion or color the tone. Instead, the Relay Xo employs military-grade gold-contact sealed relays to do the switching. Switching may be done using the side-access pushbutton switch or by remote control via the XLR and 1/4" input jacks using either the Radial JR1-L latching or JR1-M momentary footswitch. A remote link enables multiple Relay Xo's to be used in tandem.

Features:

  • Switch vocal microphone from PA to intercom
  • Allows artist to speak with musicians and techs
  • Remote control using footswitch
  • Route any balanced signal to two destinations

Specifications for the Radial (R800 8030) Audio Switcher

Audio circuit type:Remotely controlled mechanical relay
Frequency response:10Hz ~ 100kHz
Dynamic range:>140dB
Gain:0dB
Total harmonic distortion:<0.0005%
Intermodulation Distortion:0.001%
Input Impedance:Source dependent
Output Impedance:Source dependent
Common Mode Rejection Ratio:-106dB
Noise:-115dBu
Maximum Input:+26dBu
Features
Ground lift
Input Connectors:XLR-F input
Output Connectors:2 XLR-M outputs
Extras:
Combo (XLR-F & ¼" ) and ¼" loop-through remote connectors
Contact Closure Function
With ¼" TRS jack, short tip and ground to switch
With XLR, short pin-1 ground and pin-2 Hot to switch
General
Construction:14 gauge steel with internal I-beam
Size (L x W x D):5" x 3.3" x 1.8" (127mm x 84mm x 45.5mm)
Weight:1.4 lbs (0.6kg)
Shipping size (L x W x D):6.5" x 4" x 3" (165mm x 102mm x 76mm)
Shipping weight:2.4lbs (1.08 kg)
Power:15VDC, 30mA, center-pin (+)
Conditions:For use in dry locations only between 5°C and 40°C

Read 0 reviews for the (R800 8030) Audio Switcher - Balanced

Overall Rating:
N/A
Leave a review
mgctlbxN$MZP mgctlbxV$5.1.13 mgctlbxL$C