| { "Stereo Mode - Watts Per Channel:" : { "8 Ohm Peak, Both Channels Driven" : "600 Watts ", "4 Ohm Peak, Both Channels Driven" : "800 Watts ", "8 Ohm Continuous, Both Channels Driven" : "400 Watts ", "4 Ohm Continuous, Both Channels Driven" : "600 Watts" }, "Distortion (typical, 1 kHz at full rated power)" : "< 1% THD", "Signal-to-Noise Ratio (A-weighted, 20 Hz - 20kHz)" : "100 dB", "Input Sensitivity" : "1.2 Vrms, 3.9 Vrms", "Voltage Gain (8 Ohms)" : "33.5 dB", "Output Circuitry" : "Class D", "Power Requirements - 1/8 Power at 4 Ohms:" : { "100 VAC" : "3.4 Amps ", "120 VAC" : "2.9 Amps ", "230 VAC" : "1.6 Amps" }, "Frequency Response" : "20 Hz - 20 kHz, +0.7 dB,-0.8 dB", "Dynamic Headroom (4 Ohms)" : "1.25 dB", "Damping Factor" : "100", "Input Impedance:" : [ "20 kOhms (balanced) ", "10 kOhms(unbalanced)" ], "Maximum Input Level" : "+23.5 dBu", "Input Connectors (each channel)" : "3-pin XLRF /1/4" TRS, balanced", "Output Connectors (each channel)" : "NL4 (Channel 1- 1+/-, Channel 2 - 2+/-), binding posts", "Amplifier and Load Protection:" : [ "Short circuit ", "Open circuit ", "Thermal ", "RF protection ", "Load protected against DC faults" ], "Front Panel Controls and Indicators:" : [ "2x Rotary Encoders ", "3x Operational Buttons (HOME, ENTER, EXIT) ", "2x Green Signal LEDs, indicates signal presence ", "2x Red A/D Clip LEDs, indicate input over-drive and/or amplifier current clipping ", "Blue Power LED ring, AC on ", "2.12" x 1.0", 256 x 128 pixel LCD panel" ], "DSP Functions:" : [ "High Pass Filter, 4th order LR, adjustable Frequency 20 Hz to 4 kHz ", "Low Pass Filter, 4th order LR, adjustable Frequency 60 Hz to 4 kHz ", "4-band PEQ, with variable Frequency, Gain, and Bandwidth ", "Peak Limiter, with Power, Aggressiveness, and Impedance selection ", "Delay 50 msec max." ], "Dimensions (HxWxD)" : "3.5" (2RU) x 19" x 10.2"(89mm x 483mm x 259mm)", "Weight" : "11.3 lbs (5.1 kg)", "Agency Approvals" : "UL, CE, RoHS/WEEE Compliant", "Carton and Contents" : "Power cable and quick start guide" } |