| { "General": { "Power Requirements": "12 V DC (10.8 V to 13.2 V), DC 42 V to 57 V (Camera Input, PoE+ power supply)", "Current Consumption": "1.0 A (Connector Input), 0.6 A (PoE+ power supply)", "Ambient Operating Temperature": "0 °C to 40 °C (32 °F to 104 °F)", "Allowable Humidity Ranges": "10 % to 90 % (no condensation)", "Storage Temperature": "-20 °C to 50 °C (-4 °F to 122 °F)", "Mass": "Approx. 3.2 kg (7.05 lb)", "Dimensions (W x H x D)": "342 mm x 178 mm x 245 mm (13-15/32 inches x 7 inches x 9-21/32 inches)(excluding protrusions)", "Connection Supported Equipment": "IP/RS422AW-UE150W/K, AW-HR140*1, AW-HE130W/K*1, AW-HN130W/K*1, AW-UE70W/K*1, AW-UN70W/K*1, AW-HE40 Series*1, AW-HN40HW/HK*1, AW-HE38HW/HK*1, AW-HN38HW/HK*1" }, "Input/Output Connectors": { "Input": { "DC 12 V IN": "XLR 4-pin", "3G-SDI IN": [ "SMPTE292 / 75 O (BNC x 1)", { "Supported formats" : "1080/59.94p*2, 1080/50p*2, 1080/59.94i, 1080/50i, 1080/23.98p, 1080/25p, 1080/23.98PsF, 1080/25PsF" } ] }, "Output": { "3G-SDIACTIVE THRU OUT" : "SMPTE292 / 75 Ω (BNC x 1)" }, "Input/Output": { "IP CONT": [ "100BASE-TX", "PoE+ input", "Connection cable: LAN cable, max. 100 m (328 ft)", "When connecting the unit via a switching hub: Straight cable or a cross cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended", "When connecting the unit directly: Crossover cable (category 5 cable), STP (Shielded Twisted Pair) cable recommended" ], "SERIAL CONT (RJ-45)": { "RS-422 (control signals for remote cameras)" : "", "Connecting cable" : "Straight cable (category 5e or better shielded cable), max. 1000 m (3280 ft)" }, "TALLY OUT": [ "Open collector output (negative logic)", "Maximum voltage resistance DC 24 V, Maximum current 50 mA" ], "TALLY/GPIO 1": { "D-sub 25-pin, female, inch thread" : "", "TALLY IN" : "10 inputs (for receiving photocoupler signals)", "GPI" : "6 inputs (for receiving photocoupler signals)", "GPIO" : " 5 inputs (for receiving photocoupler signals) or 5 outputs (open collector outputs, negative logic)", "Input/output switched with menu settings" : "" }, "GPIO 2": { "D-sub 25-pin, female, inch thread" : "", "GPI" : "10 inputs (for receiving photocoupler signals)", "GPIO" : "10 inputs (for receiving photocoupler signals) or 10 outputs (open collector outputs, negative logic)", "Input/output switched with menu settings" : "", "Reserve connectors" : "2 connectors (For future expansion feature)" } }, "LCD Display": "7-inch Touch Panel GUI Monitor (WVGA(800×480))", "SD Memory Card Slot": "SDHC / SDXC Memory Card Slot x 1" }, "Connection Specifications": { "No. of Connectable Cameras": "200 (IP), 5 (RS422)", "No. of Camera Selection Buttons": "10", "No. of Camera Groups": "20 (10 units per 1 group)" }, "Memory": { "Preset Memory": "No. of memory presets 100", "Tracing Memory": { "No. of cameras": "Cam1 to Cam10", "Recording time, no. of memory settings": "Maximum 5 min. total per camera, maximum of 10 settings per camera" } }, "Other Functions": { "No. of User Assignable Buttons": "6 + up to 10 on the LCD menu", "Pan / Tilt Speed Adjustment": "7 levels", "TALLY LED Display Color:": "green / red" } } |