| { "Acoustics" : { "TYPE" : " Compact, direct radiating powered subwoofer ", "FREQUENCY RESPONSE (Measured on-axis on ground plane (2π space) at 2 metres, then referred to 1 metre)" : "47Hz – 150Hz ±3dB, -10dB @ 41Hz", "DRIVER" : " 18” (460mm)/4” (100mm) voice coil, long excursion, ferrite magnet, waterproof cone ", "INPUT SENSITIVITY" : " -20dBu for 100dB SPL (CDD12/15 pre-set) -13dBu for 100dB SPL (CDD8 pre-set)", "MAXIMUM SPL (Measured in half-space at 1 metre with a tone burst signal.)" : " 132dB continuous / 135dB peak ", "DISPERSION" : " Omnidirectional / or Cardioid (paired) ", "CROSSOVER" : " Active Presets for CDD Live 8, 12 & 15 mono-pole or cardioid (paired) " }, "Module Audio input" : { "CONNECTORS" : " Female XLR input, male XLR link output, Dante Audio Neutrik® Ethercon ", "ANALOGUE INPUT IMPEDANCE" : " 20 kΩ balanced to ground ", "MAXIMUM ANALOGUE INPUT LEVEL" : " 24.6 Vpp (+21dBu), over voltage protected ", "Internal Processing" : " Multi-channel DSP, programmable via TCP/IP using VU-Net software PEQ/shelving filters Up to 48dB/Oct LPF Up to 200ms input delay Pre-set selection via rear panel switch " }, "Network" : { "CONNECTORS" : " 2 x Neutrik® Ethercon ", "PROTOCOL" : "TCP/IP and UDP/IP" }, "Amplifier Module" : { "TYPE" : " 2 channel switch-mode, class D, Bridged Tied ", "PEAK OUTPUT POWER" : " 2000W total ", "AVERAGE EFFICIENCY" : " 89% ", "COOLING" : " External fan ", "MAXIMUM AMBIENT TEMPERATURE" : " 40°C (104°F) for full output " }, "Power Supply" : { "TYPE" : " Switch mode, fixed frequency with PFC ", "AC INPUT OPERATING RANGE" : " 85 – 265V ∼ AC, 50 - 60Hz ", "POWER FACTOR" : " > 0.98 ", "NOMINAL POWER CONSUMPTION" : " 125W ", " MAINS CONNECTOR " : " Neutrik® Powercon True1 " }, "Mechanical" : { "ENCLOSURE" : " Extensively braced multi-laminate plywood. ", "FINISH" : " Durable Polyurea Coating ", "PROTECTIVE GRILLE" : " Black perforated Zintec ", "FITTINGS" : " Two skids on base, with mating channels on top 16 x M8 inserts for optional castors M20 top-mounted thread plate for pole mounting 16 x M10 mounting points 2x Bar handles, 1 on each side 4x fittings for optional transit cover ", "IP RATING" : " IP24 factory option available ", "DIMENSIONS" : " (W) 600mm x (H) 507mm x (D) 632mm (760mm including castors) (W) 23.62in x (H) 20in x (D) 24.86in (29.90in including castors) ", "WEIGHT" : " 46.5kg (103lbs) w/o castors 50kg (110lbs) with castors " } } |