| { "General" : { "Number of amplifier channels" : "4", "Total output all channels driven" : "500 W", "Peak output voltage per channel" : "100 V / 70 Vrms", "Max. output current" : "9.9 Arms" }, "Max output power (all channels driven)" : { "2 ohms" : "N.R.", "4 ohms" : "125 W", "8 ohms" : "125 W", "16 ohms" : "125 W (requires the “70 V” mode for the RSL, “Lo-Z” gives 63 W)", "70 V" : "125 W", "100 V" : "Can deliver 125 W to a 100 V load tapped at 250 W" }, "Performance" : { "THD 20 Hz - 20 kHz at 1 W" : "<0.1%", "THD at 1 kHz and 1 dB below clipping" : "<0.05%", "Signal to Noise Ratio" : ">112 dBA", "Channel separation (Crosstalk) at 1 kHz" : "> 70 dB", "Frequency Response" : "2 Hz - 40 kHz", "Input impedance" : "20 kOhm", "Common Mode Rejection (CMR)" : "50 dB", "Output impedance" : "25 mOhm" }, "Gain, Sensitivity and Limiters" : { "Limit and gain switch defining limit and gain (per channel)" : "2 pos: Lo-Z and 70 V", "VPL for 70 V mode" : "100 V", "VPL for Lo-Z mode" : "44.7 V", "Sensitivity for stated power into 8 Ohm in Lo-Z mode" : "4 dBu", "Sensitivity for 70.7 V out in 70 V mode" : "4 dBu", "Sensitivity for stated power into 4 Ohm in Lo-Z mode" : "1 dBu", "Sensitivity for stated power into 16 Ohm in 70 V mode" : "0 dBu", "Gain in 70 V mode" : "35.2 dB", "Gain in Lo-Z mode" : "28.2 dB", "Level adjustment (per channel)" : "Rear panel potentiometer, from -inf to 0 dB" }, "Connectors and Switches" : { "Input connectors (per ch.)" : "3 - pin detachable screw terminals, electronically balanced", "Output connectors (per ch.)" : "2 - pin detachable screw terminals", "High pass filter" : "Fixed at 50 Hz, switchable per channel", "Power control" : "Can be used to go between standby and ON", "GPI (power control input)" : "Contact closure type, 2-pin detachable screw terminal, controls the power state", "GPO (power state output)" : "Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state", "Cooling" : "Two fans, front-rear airflow, temperature controlled speed" }, "Power" : { "Nominal voltage" : "100 - 240 VAC", "Operating voltage" : "85 – 265 VAC", "Standby consumption" : "<1 W", "Mains connector" : "IEC inlet" }, "Dimensions" : { "Dimensions" : "W: 483 mm (19”), H: 44 mm (1 U), D: 381 mm (15”)" }, "Weight" : { "Weight" : "6 kg (13.2 lbs)" }, "Finish" : { "Finish" : "Dark grey aluminum front and black steel chassis" }, "Approvals" : { "Approvals" : "CE, ANSI/UL 60065 (ETL), CSA, CCC, PSE, Energy Star" } } |