| { "General" : { "Number of Amplifier Channels" : "2", "Max Total Output, All Channels Driven" : "400 W", "Peak Output Voltage Per Channel" : "100 V / 70 Vrms", "Max Output Current" : "11 Arms" }, "Max output Power (All Channels Driven)" : { "2 Ohms" : "200 W", "4 Ohms" : "200 W", "8 Ohms" : "200 W (requires the "70V" mode for the RSL, Lo-Z gives 100 W)", "16 Ohms" : "200 W (requires the "70V" mode for the RSL, Lo-Z gives 50 W)", "70V" : "200 W", "100V" : "Can deliver 200 W to a 100V load tapped at 400 W" }, "Performance" : { "THD 20 Hz - 20 kHz at 1 W" : "< 0.1%", "THD at 1 kHz and 1 dB Below Clipping" : "< 0.05%", "Signal to Noise Ratio" : "> 112 dBA", "Channel Separation (crosstalk) at 1 kHz" : "> 70 dB", "Frequency Response" : "2 Hz - 40 kHz", "Input Impedance" : "20 kOhms", "Common Mode Rejection (CMR)" : "50 dB", "Output Impedance" : "25 mOhms" }, "Gain, Sensitivity, and Limiters" : { "Limit and Gain Switch Defining Limit and Gain (per channel)" : "2 positions — Lo-Z and 70V", "VPL for 70V Mode" : "100 V", "VPL for Lo-Z Mode" : "40 V", "Sensitivity for Stated Power into 4 Ohm in Lo-Z Mode" : "4 dBu", "Sensitivity for Stated Power into 70.7V Out in 70V Mode" : "4 dBu", "Sensitivity for Stated Power into 2 Ohm in Lo-Z Mode" : "1 dBu", "Sensitivity for Stated Power into 8 Ohm 70V Mode" : "-0.8 dBu", "Sensitivity for Stated Power into 16 Ohm in 70V Mode" : "2.1 dBu", "Gain in 70V Mode" : "35.2 dB", "Gain in Lo-Z Mode" : "27.2 dB", "Level Adjustment (per channel)" : "Rear panel potentiometer, from -inf to 0 dB" }, "Connectors and Buttons" : { "Input Connectors (per ch.)" : "3x pin detachable screw terminals, electronically balanced", "Output Connectors (per ch.)" : "2x pin detachable screw terminals", "High Pass Filter" : "Fixed at 50 Hz, switchable per channel", "Power Control" : "Can be used to go between standby and ON", "GPI (power control input)" : "Contact closure type, 2-pin detachable screw terminal, controls the power state", "GPO (power state output)" : "Contact closure type, 2-pin detachable screw terminal, for external monitoring of the power state", "Cooling" : "Single fan, front to rear airflow, no filter required, temperature controlled speed" }, "Power" : { "Nominal Voltage" : "100 - 240 VAC", "Operating Voltage" : "70 - 265 VAC", "Standby Consumption" : "< 1 W", "Mains Connector" : "IEC inlet" }, "Dimensions" : "19" W x 1.73" W (1RU) x 10.9" D (483 x 44 x 276 mm)", "Weight" : "9.3 lbs (4.2 kg)", "Finish" : "Dark gray aluminum front and black steel chassis", "Approvals" : "CE, RoHS, UL (UL 60065), CSA C22.2 NO. 60065, FCC Part 15 Subpart B Class A, PSE, CCC Energy Star" } |