800-562-6006

Furman 15A Standard Power Conditioner with Sequencer with eight outlets in the rear panel

Power Sequencer

No reviews yet. Leave a review

What's in the box:

  • Furman M-8x2 Merit Series 8 Outlet Power Conditioner & Surge Protector
  • 3-Year Warranty

Get More Value with CCI Solutions

Worry-Free Guarantee
FREE Certified Tech Support
Best Available Price
Retail Price
$489.95
Save 12%
−$60.00
CCI Price
$429.95
*Due to the global microchip shortage and related shipping issues, many items are experiencing fulfillment delays. Please contact us for up-to-date availability.
Call 800-562-6006 for Availability
Item Number 
FUR-M8S
Vendor Part

The perfect low-cost AC power solution for any rack mount system where power sequencing is desired!

The Furman M-8S is an AC power sequencing solution for your rack mount system. Install an M-8S in your rack, and the eight outlets in the rear panel will power up in sequence and protect all your equipment up to a 15-amp load. There is also an additional unswitched single outlet on the front of the unit for convenience.

Features:

  • Standard level AC protection & filtering
  • 6 configurable delayed rear panel outlets (in 3 groups), 2 unswitched rear panel outlets, & 1 front panel unswitched outlet
  • Momentary & Maintained sequencing via rear panel terminal block or front panel switch (momentary only)
  • All settings & configurations available on rear panel
  • 15 amp rating

Specifications for the Furman 15A Standard Power Conditioner with Sequencer

{ "General" : { "Family" : "Merit Series", "Line Voltage" : "120 (Volts) ", "BlueBOLT Enabled" : "No" }, "AC Protection" : { "Automatic Voltage Shutoff" : "No" }, "Shipping Info" : { "Length" : "21.9 (Inches) ", "Width" : "9.4 (Inches) ", "Height" : "3.4 (Inches) ", "Weight" : "7.65 (Lbs) ", "Unit of Measure" : "Each", "UPC" : "654061041078", "Master Pack Qty" : "6" }, "Other Specifications" : { "Maximum AC Current Rating" : "15 Amps, 120 VAC (Thermal breaker)", "AC Cord" : " 14AWGx3, 10 feet, black, fixed, NEMA 5-15P plug", "Convenience Outlet (Front Panel)" : " 1 Un-switched NEMA 15-5R", "Rear Panel Outlets" : [ " 2 Un-switched NEMA 5-15R (1 duplex) ", "6 Sequenced NEMA 5-15R (3 duplexes, each controlled by separate relay) " ], "AC Surge Protection" : " Merit Class (sacrificial) ", "Spike Protection Mode" : " Line to neutral, zero ground leakage", "Max Continuous Operating Voltage" : " 130V RMS", "Max Clamp Voltage" : " 500 Volts Peak", "Peak Impulse Current" : " 12,000 Amps", "Energy Rating (2 X 820μS)" : " 225 Joules", "AC Filtering" : "Pi LCR Filter", "Noise Attenuation" : ">26dB, 100 Khz to 1 MHz", "Operating Temperature Range" : "5C (40F) to 40C (105F) degrees", "Humidity Range" : "<90% rH (Relative Humidity) ", "Rocker Switch" : " Front panel, Sequence (ON, OFF) ", "Thermal Circuit Breaker" : " Front panel, push to reset", "Front panel indicators" : " Delay 1, Delay 2, Delay 3, Power, Protection OK", "Control/Status/Triggering (Rear Panel)" : "Rear Panel DIP Switches: 12V Mode On/Off, GND Mode On, Momentary/Maintained", "Potentiometer" : " Rear panel, time calibration fine tune delay adjust", "Remote Terminal" : [ "+5-30VDC In, 12VDC (12mA) Out", "Phoenix type 4-Pin Connector with Screw terminals", "+12V, STAT, REM, GND (Class 2 Wiring) " ], "Size" : "1.75" X 19.00" X 6.5" (HWD) – ANSI 1RU", "Mass" : "5.3 lbs. ", "Power Consumption (No Load)" : "5 Watts", "Safety Agency" : "C/CSA/US" } }

Read 0 reviews for the 15A Standard Power Conditioner with Sequencer with eight outlets in the rear panel

Overall Rating:
N/A
Leave a review