{ "Directional pattern": "Cardioid", "Principle of operation": "Pressure gradient", "Cartridge type": "Pre-polarized condenser", "Effective frequency response": "20 Hz - 20 kHz", "Frequency range, ±2 dB, Near field 2-3 cm (0.8 - 1.2 in)": "100 Hz - 20 kHz (4 - 6 dB soft boost at 15 kHz)", "Sensitivity, nominal, ±3 dB at 1 kHz": "6 mV/Pa; -44 dB re. 1 V/Pa", "Equivalent noise level, A-weighted": "Typ. 26 dB(A) re. 20 µPa (max. 28 dB(A))", "Equivalent noise level, ITU-R BS.468-4": "Typ. 38 dB (max. 40 dB)", "Distortion, THD < 1% - Legacy": "120 dB SPL RMS, 123 dB SPL peak", "Distortion, THD < 1% - CORE": "134 dB SPL RMS, 137 dB SPL peak", "Dynamic range - Legacy": "Typ. 97 dB", "Dynamic range - CORE": "Typ. 111 dB", "Max. SPL, THD 10%": "144 dB SPL peak", "Rated output impedance": "From MicroDot: 30 - 40 Ω. From DAD6001: 100 Ω", "Cable drive capability": "Up to 300 m (984 ft) with DAD6001-BC XLR Adapter", "Output balance principle": "Signal balanced with DAD6001-BC XLR Adapter", "Common mode rejection ratio (CMRR)": "> 60 dB from 50 Hz to 15 kHz with DAD6001-BC XLR Adapter", "Power supply (for full performance)": "Min. 5 V to max. 50 V through DPA adapter for wireless systems", "Current consumption": "Typ. 1.5 mA (microphone). 3.5 mA with DAD6001-BC XLR Adapter", "Connector": "MicroDot", "Color": "Black, beige or brown", "Weight": "Single Ear: 10 g (0.35 oz)", "Microphone diameter": "5.4 mm (0.21 in)", "Microphone length": "12.7 mm (0.5 in)", "Cable length": "1.25 m (4.1 ft)", "Cable color": "Black, beige or brown", "Cable diameter": "1.6 mm (0.06 in)", "Polarity": "Positively increasing sound pressure produces positive-going voltage at MicroDot pin (and pin 2 on DAD6001 XLR adapter)", "Temperature range": "-40°C to 45°C (-40°F to 113°F)", "Relative humidity (RH)": "Up to 90%" } |