| { "Inputs" : { "Mic/Line XLR Inputs" : "Balanced XLR, +48V phantom power", "Mic/Line Preamp" : "Fully recallable", "Input Sensitivity" : "-60 to +15dBu", "Analogue Gain" : "+5 to +60dB, 1dB steps", "Pad" : "-20dB Active PAD", "Maximum Input Level" : "+30dBu (PAD in)", "Input Impedance" : ">4kI (Pad out), >10kI (Pad in)", "Mic EIN" : "-127dB with 150 Up to 48 I/O endpoints can be created via Allen & Heath networked I/O boxes running the DX and gigaACE protocols. Almost any external control system capable of making a TCP/IP connection can be used to control DM32, in addition to Allen & Heath‚s own IP remote controllers and dLive Surfaces source", "Phantom Power indication" : "Per socket, internal or external phantom power sensing, triggered at 24V" }, "Outputs" : { "Analogue XLR Outputs" : "Balanced, Relay protected", "Output Impedance" : "<75I", "Nominal Output" : "+4dBu = 0dB meter reading", "Maximum Output Level" : "+22dBu", "Residual Output Noise" : "-92dBu (muted, 20-20kHz) -90dBu (muted, 20-40kHz)" }, "Dimensions and Weights" : { "Width x Depth x Height x Weight" : { "DM32" : "482.6 x 313 x 325 mm (19"x 12.3"x 12.8") x 15kg (33lbs)", "DM32 - boxed" : "590 x 420 x 470 mm (23.2"x 16.5"x 18.5") x 17.5kg (38.6lbs)" } }, "System" : { "Measured balanced XLR in to XLR out, 20-20kHz, minimum Gain, Pad out, signal @ 0dB (meter)" : { "Dynamic Range" : "110dB", "System Signal to Noise" : "-92dB", "Frequency Response" : "20Hz - 30kHz +0/-0.8dB", "THD+N (analogue in to out)" : [ "0.0015% @ +16dBu output, 1kHz", "0dB gain" ], "Headroom" : "+18dB", "Internal operating Level" : "0dBu", "dBFS Alignment" : "+18dBu = 0dBFS (+22dBu at XLR output)", "Meter Calibration" : "0dB meter = -18dBFS (+4dBu at XLR out)", "Meter Peak indication" : "-3dBFS (+19dBu at XLR out)", "Sampling Rate" : "96kHz +/- 20 PPM", "ADC" : "24-bit Delta-Sigma", "DAC" : "24-bit Delta-Sigma", "Latency" : [ "0.7 ms (MixRack XLR in to XLR out, Input to Mix)", "+ 5 samples, Surface to Mixrack (GigaACE hop)", "+ 8 samples, DX32 to Mixrack (DX hop)" ] } }, "Power" : { "Mains Voltage Operating Range" : "100-240V AC, 50/60Hz", "Mains Power Consumption" : [ "300W max (MPS16 V1 300W)*", "250W max (MPS16 V2 250W)*", "*MPS16 power consumption is printed under AC inlet" ] }, "Temperature" : { "Operating Temperature Range" : { "Fitted with" : "MPS16 V1 300w 0°C to 35°C (32°F to 95°F)", "Fitted with" : "MPS16 V2 250w 0°C to 40°C (32°F to 104°F)" } } } |