| { "Analog Outputs" : { "Frequency Response" : "20 Hz – 20 kHz, ± 0.5 dB.", "Channel Separation" : "> 111 dB @ 1 kHz, +24 dBu.", "Connectors" : "3.5 mm Phoenix® connectors.", "Number of outputs" : "Four (4) balanced line level.", "Nominal output level" : "+4 dBu with 20 dB of headroom.", "Maximum output level" : "+24 dBu (+22.8 dBu into a 2k Ohm minimum load).", "Output impedance" : "300 Ohms balanced, 150 Ohms unbalanced.", "Dynamic range" : "> 118 dB, A-weighted.", "THD + Noise" : "< -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.", "Latency" : "0.60 mS." }, "System" : { "Sampling Rate" : "48 kHz, ± 100 ppm.", "Dante Cable" : "Standard CAT6, maximum device-to-device length = 100 meters." }, "Mechanical Specifications" : { "Space Required" : "Half rack unit (WDH: 20.83 cm x 22.86 cm x 4.37 cm / 8.2 in. x 9 in. x 1.72 in.) Depth does not include connector allowance. Allow at least 3 inches additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.", "Electrical" : "PoE IEEE 802.3af Class 0, 10 Watts maximum. No line voltage switching required (100-250 VAC, 50-60 Hz).", "Ventilation" : "Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.", "Certifications or Compliance" : "UL 60065, cUL 60065, IEC 60065, FCC 15.109:2015, FCC 15.109(g):2015, FCC 15.107:2015, (CISPR 32), EN 55032:2012, EN 55103-2:2009, EN 61000-3-3:2013, EN 61000-3-2:2006, ICES-003:2012, RoHS.", "Shipping Weight" : "4.4 lbs. (2.0 kg)" } } |