| { "General Specifications" : { "Sampling rate" : "48 kHz, ± 100 ppm.", "Frequency response (D/A)" : "20 Hz – 20 kHz, ± 0.5 dB.", "Channel separation (D/A)" : "> 111 dB @ 1 kHz, +24 dBu.", "Dante cable" : "Standard CAT6, maximum device to device length = 100 meters.", "Connectors" : "3.81 mm terminal blocks.", "Number of outputs" : "Twelve (12) balanced line level.", "Nominal output level" : "+4 dBu with 20 dB of headroom.", "Maximum output level" : "+24 dBu (+22.8 dBu into a 2k Ohm minimum load).", "Output Impedance" : "300 Ohms balanced, 150 Ohms unbalanced.", "Dynamic Range" : "> 118 dB, A-weighted.", "THD+Noise" : "< -105 dB, unweighted; 1 kHz @ +22 dBu with 0 dB gain.", "Latency" : "0.60 mS." }, "Mechanical Data" : { "Space Required" : "1U (WDH: 18.91 in x 9.5 in x 1.72 in / 48.02 cm x 24.13 cm x 4.37 cm). Depth does not include connector allowance. Allow at least 3 inch additional clearance for rear panel connections. Additional depth may be required depending upon your specific wiring and connections.", "Electrical" : "100-240 VAC, 50/60 Hz, 25 Watts maximum universal input. No line voltage switching required.", "Ventilation" : "Maximum recommended ambient operating temperature is 30 C / 86 F. Ensure that the left and right equipment sides are unobstructed (5.08 cm, 2 in. minimum clearance). The ventilation should not be impeded by covering the ventilation openings with items such as newspapers, tablecloths, curtains, etc.", "Shipping Weight" : "12 lbs. (5.4 kg).", "Certifications or Compliance" : "UL 60065, cUL 60065, IEC 60065, EN 55103-1, EN 55103-2, FCC Part 15, RoHS." } } |